Patented measuring technology by MionTec
The same sample.
Two different answers.
Conventional TOC measurement recognises neither HCO₃⁻ nor TDS nor TOC⁻ — in slightly saline water it is therefore off by ± 100…300 %. HighResTOC measures there with a limit of detection of 2…5 ppb.
Neutral condensate, 0.2…2 µS/cm. Both curves come from the same measurement series.
Organic carbon, fully resolved.
Online. 24/7.
Resolution
How finely can you measure
when there is salt in the water?
At 1 µS/cm: ± 100 ppb against ± 2 ppb. Same sample, same conductivity — resolved 50 times more finely.
High TOC resolution — even where interfering salinity used to set the limit.
Water analysis
What is really in the water?
The complete ion balance. Cations, anions and carbon — measured separately.
HighResTOC determines the complete water analysis — cations, anions and carbon content.
Response time
And how fast do you see it?
Depending on the version, detected in under a minute — and you know what has broken through. Organics, drinking water or a mixture: HighResTOC measures the complete water analysis and classifies the peak.
Fast troubleshooting in the condensate network. You find the leaking heat exchanger during operation — and every minute earlier saves money.
Measuring principle
How does HighResTOC measure?
One sample stream. Measured in parallel. The sample is split — each branch gets its own measurement.
Four measurements — one result. HighResTOC measures up to four conductivities and derives the TOC from them via water-chemistry relationships — and the complete water analysis with it.
Patents granted and pending
Product lines
For every water
the right model.
High TOC resolution, even with interfering salinity. For your water too.
Not sure which model suits your water?
Option
Hot sample stream?
No problem.
Sample pre-cooler — optional add-on. HighResTOC detects the module, controls the coolant itself and holds the sample automatically at 25 °C — the temperature for the best accuracy.
- Detected automatically — no configuration
- Controls to 25 °C, the temperature for the best accuracy
- Can be retrofitted at any time
Integration
And how do the readings
reach you?
One device. Many readings. Many routes. Easy integration into your existing systems.
* MQTT — coming soon.
Fits any system. And where it does not, we tailor it.
Access
From the plant
to the office.
At the HighResTOC. And anywhere you release it. One device. One interface. Three roles — all at the same time and independently. No extra software.
Runs standalone — no network required
Remote dashboard
All your devices
in one place.
No integration, no provisioning, no setup in your network. The device arrives connected — zero-touch deployment.
- Remote access enabled per deviceblocked · read only · full access
- Start/stop and configuration password-protectedseparate releases per role
- Measurement data stays on your deviceno cloud subscription, no data outflow
- No extra softwareall functions are built in
Measurement data
Safely kept and
available at any time.
A reading every 15 seconds — from day one. The complete history sits on the device and can be pulled off at any time.
- ↓Always availabledownload as CSV or ZIP, to a USB stick or by e-mail to QA
- ▣Stored on the deviceno cloud subscription, no online storage
- ✓Audit-readycomplete, unaltered, without extra software
Operation
Evaluate without detours.
Bars, table, history and correlation all sit on the start page — one tap is enough. No submenu, no training.
The complete water analysis.
Online. 24/7.
Talk to us about your water — we will tell you which model fits.
Patents granted and pending